All forms of sanitary waste disposal are handled by Hydro-Vacuum. They are used to empty septage from cesspits, septic tanks, pit latrines and communal latrines, for street cleanup, for sewer clean out, and for individual septic systems [1] and can also be used for cleanup of contaminated soil. The trucks are used in the cleaning of sanitary sewer lift stations. Hydro-Vacuum are used a to empty portable toilets. In commercial aviation, Hydro-Vacuum are used to collect waste from airplane toilets. Hydro-Vacuum discharge these wastes to the sewer network, to a wastewatertreatment plant, in a pit for composting, orusually illegallyinto the environment.
& Hydro Vacuum
Bpas9000 Corp. is equipment to services all your plumbing and hydro-vacuum services needs. Our efforts and customers satisfaction is guarantee in Ontario, we all have a 24/7 service to take of the emergency situations that are unplanned for.
Our fully licensed and friendly technicians are committed to answering your questions directly and honestly, and solving your plumbing problems to your satisfaction. All of our staffs are well trained and prepared to providing a great professionalism, with our team we take away all your worries and provide the solution requirement at each job site.
>Working On time
>Affordable rates
>24/7 Availality
>No hidden cost
BPAS9000 CORP.
The latter practice, called "institutionalised open defecation", is dangerous since it constitutes a health, and environmental, hazard.
Hydro-Vacuum are used in the petroleum industry, for cleaning of storage tanks and spills. They are also an important part of drilling oil and natural gas wells, as they are located at the drilling site. Hydro-Vacuum are used to remove drilling mud, drilling cuttings, cement, spills, and for removal of brine water from production tanks. They dispose of this in sump pits, treatment plants or if within safe levels may be spread out in a farmer's field.
Hydro-Vacuum are also used for exposing underground utilities. The ground is jetted with water, and the Hydro-Vacuum sucks up the muddy product. This exposes the buried utility without the possibility of damage, as would be possible if a digging machine were used (i.e. tractor backhoe, tracked or wheeled excavator, ditch witches).
We have facility to produce advance work various industrial applications based on specially developed technol-ogy. We are also ready to developement by according to users changing needs. Infrastructure related installation projects. General repair & industrial and machinery.
We only source material from tried & trusted suppliers that meet our exacting standards of quality control. Our team up-to-date, sustainable custom manufacturing solutions.
Why Choose Us
ADVANCED
TECHNOLOGY
WORKING
ON TIME
CERTIFIED
ENGINEERS
A backwater valve is a one way flow control valve installed in a drainage system, that under normal conditions allows the waste water to drain out of the system but if a reversal of flow should occur, the valve will be forced closed and protect the interior of the building from sewage backup. Every year thousands of homes are flooded with raw sewage and storm water causing millions in damages that could have been avoided with properly installed backwater valves.
Drainage Services has a Backwater Valve Subsidy Program to assist homeowners to install a backwater valve. Reimbursement only applies to qualified residential property owners. The valve is normally installed on either the main sewer line where the sanitary sewer exits the house or on various branch line locations to prevent sanitary sewer backup.
Backwater Valve
CAMERA INSPECTION & LOCATING DRAIN
With the invention of drain and sewer camera inspection technology Toronto plumbers can now take the messy work out of diagnosing hard to see sewer and drain problems. we can now access these pipes directly. Saving time and money. During the inspection the camera also provides extra information such as the length of cable thats been deployed this allows us to quickly assess exactly how far into the pipe a problem may be present.
Camera Inspection needs to be matched to the type of service being provided:
>Digital Scanning and Digital Scanning.
> Establish the condition of manholes and pipelines.
> Identify immediate maintenance and structural needs.
The most common source of drain blockage inside a home is an accumulation of the soaps and shampoos that we are use so frequently. Most of these products have a base of animal fat. When they are rinsed down the drain, they tend to cool and cling to the inside of your drain lines where they act like glue, causing other debris (hair, rust, mineral sediment in the water, toothpaste, coffee grounds, food particles, etc.) to attach themselves to the walls.
The most vulnerable locations for this process to happen are the parts of the drain system furthest from the drain itself, or any places where the line is fairly horizontal and the speed of the running drain water slows down.
A drain line from a sink or tub usually consists of pipe with an inside diameter of 1-1/2 inches, part of the system designed to carry away your waste water. However, as a clog slowly develops in the line, the diameter of the pipe is narrowed, slowing the water flow in it. This reduced flow then allows even more debris to cling to the sides of the drain line, exaggerating the problem further. Soon you can have an opening the size of a straw, which will eventually close totally.
When faced with a difficult stoppage many do-it-yourselfers will wonder how to snake a drain. The answer to this common question depends on which type of drain you are going to snake. If you are looking up how to snake a drain then most likely plunging did not work. Plunging a drain is usually the first thing to try because it is the quickest and easiest way to clear a stoppage. When a plunger is not enough to clear a clog the next step is to use a drain snake. A quick word about drain snakes is necessary before I outline the instructions for how to snake a drain.
Heating systems are forcibly cleansed using water at high velocity, but low pressure, so that no physical damage is caused to the system. The objective is to restore systems with circulation and boiler noise problems (caused by sludge and corrosion deposits) to optimum operation. Power flushing removes these deposits and the problems that they cause.
It is prudent to power flush a heating system immediately before fitting a new boiler to an existing system to prevent possible future problems, indeed boiler manufacturers insist on it in order to provide long term warranties. Many systems are found to contain corrosion and sludge, even if no flow problems have yet shown themselves.
Existing debris is often mobilized by alterations to the system/piping and the increased efficiency of the new boiler, and may then accumulate in the boiler heat exchanger, causing noisy operation, reduced efficiency and, in extreme circumstances, failure of the boiler. The high efficiency and compactness of modern boilers, developed to minimise fuel costs and pollution, means that they are more susceptible to problems caused by debris in the system water.
Benefits
Powerful and effective even treats heavily silted systems.
Time saving single set-up for three product powerflushing of all radiators in one loop.
Silences boilers and heaters.
Cleans and de-scales.
Suitable for use with new and existing central heating systems.
Water neutralised, or suitable for use with acidic neutraliser.
Convenient economical pack- sufficient for treating two average domestic heating systems.
Leaves no cold spots on radiators.
Ideal for treating existing systems, removing installation debris in new systems, or before installing new boilers.
LOW PROFILE VACUUM TRUCKS
Low Profile Vacuum Trucks
Contractors that provide a vacuum truck service can mobilize to respond to environmental emergencies, clean out sumps and tanks or transfer materials from vessel to vessel. They can also provide the transportation and disposal of industrial and hazardous waste. Industrial and commercial cleaning projects often generate liquid, sludge and solid materials that are best removed by a vacuum truck service. They are the workhorses of these industries..
